Items where Subject is "Engineering"

Article

., Ogundahunsi, O. E. and ., Akpan, G. E. and ., Agbaje, C. O. and ., Oyeniyi, K and ., Olaoye, I. O. and ., Oyewusi, T. F (2024) Energy Audit and Alternative Energy Source for Sustainable Processing of Cassava Products in Oyo State, Nigeria. Journal of Engineering Research and Reports, 26 (7). pp. 462-471. ISSN 2582-2926

Abasiama J., Akpan, and William A., Olosunde, and O., Antia, Orua (2023) Mass-Indices (B-Values) of Legumes, Tuber and Sea Food for Mass-Size Reduction Operations. Journal of Engineering Research and Reports, 25 (8). pp. 115-129. ISSN 2582-2926

Abduh, Ibrahim and Syam, Husain and Muis M, Abdul (2024) Evaluating Internet Network Quality: A Comprehensive Analysis by the Pnup Directorate of Building. Journal of Engineering Research and Reports, 26 (5). pp. 237-246. ISSN 2582-2926

Akol, Alaa M. and Nassif, Nadine and Jaddoa, Khudhair Abbas and Zwain, Haider M. and Radhi, Kareem and Al-Ansari, Nadhir (2021) Effect of Irrigation System, Tillage System, and Seeding Rates on Wheat (Triticum aestivum L.) Growth, Grain Yield and Its Water Consumption and Efficiency. Engineering, 13 (11). pp. 574-594. ISSN 1947-3931

Aslam, Muhammad Azeem and Rayhan, Saiaf Bin and Zhang, Ke (2022) Dynamic Response of Structurally Reinforced Wing Leading Edge against Soft Impact. Aerospace, 9 (5). p. 260. ISSN 2226-4310

Avazbek, Obidov and Mirzaolim, Sultonov (2021) Theoretical Study of Seed Movement in Cotton Seeds Selection Device. Engineering, 13 (10). pp. 544-553. ISSN 1947-3931

Babatunde, Seun Akinfoluwe and Onugba, Michael Attah and Olutoge, Festus Adeyemi (2023) Effect of Sawdust and Coconut Shell on the Mechanical Properties of Concrete. Journal of Engineering Research and Reports, 25 (8). pp. 1-8. ISSN 2582-2926

Bai, Shijie and Zhang, Hongsheng and Li, Chang and Wu, Chaohui and Liang, Xingyu and Wang, Kun (2022) Experimental and Modeling Study of Wall Film Effect on Combustion Characteristics of Premixed Flame in a Constant Volume Combustion Bomb. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Bello, M. T. and Bichi, M. H. (2023) Model Development for Residual Chlorine. Journal of Engineering Research and Reports, 25 (8). pp. 40-47. ISSN 2582-2926

Bogdanovich, Aleksandr V. (2019) Lows of Wear Process of the Friction Pair “0.45% Carbon Steel—Polytetrafluoroethylene” during Sliding from the Position of Fracture Mechanics. World Journal of Mechanics, 09 (05). pp. 95-104. ISSN 2160-049X

Chang-Jian, Cai-Wan (2013) Bifurcation and Chaos of Gear Pair System Supported by Long Journal Bearings Based on Turbulent Flow Effect and Nonlinear Suspension Effect. World Journal of Mechanics, 03 (06). pp. 277-291. ISSN 2160-049X

Chukwuemeka Daniel, Ezeliora, and O. Adinna, B. and V. Anayo, Ezenwa, (2018) The Impact of Meteorological Conditions on the Value of Fresh and Hardened Concrete. Journal of Engineering Research and Reports, 1 (4). pp. 1-11. ISSN 2582-2926

Derevich, Igor V. and Ermolaerv, Vadim S. and Mordkovich, Vladimir Z. (2013) Hydrodynamic Limitations of Microchannel Fischer-Tropsch Reactor Operation. World Journal of Mechanics, 03 (06). pp. 292-297. ISSN 2160-049X

Diatta, Joseph Sambasene and Bassene, Laurent and Toure, Moussa (2021) Finite Element Modeling of a Solar Box Cooker: Temperature and Fluid Velocity Distributions. Engineering, 13 (10). pp. 554-563. ISSN 1947-3931

Dutta, Sridhar and Bandopadhyay, Sukumar and Ganguli, Rajive and Misra, Debasmita (2010) Machine Learning Algorithms and Their Application to Ore Reserve Estimation of Sparse and Imprecise Data. Journal of Intelligent Learning Systems and Applications, 02 (02). pp. 86-96. ISSN 2150-8402

Emeka, Nwosu, Barry and Joel, Ogbonna F. (2021) Treatment Efficiency of Drill Cuttings Using Thermal Desorption Technology. Journal of Engineering Research and Reports, 21 (3). pp. 1-12. ISSN 2582-2926

Essawy, Ahmed Hafiz Yasseen (2020) The Effect of Soil Poissons Ratio on the Response of Buildings with Sufficient Embedment Depth. Journal of Engineering Research and Reports, 17 (2). pp. 23-33. ISSN 2582-2926

Eze, Everestus Obinwanne and Goodluck, Okorafor Chinenye and Ngozi, Ujumadu Rosary and Oko, Toochukwu Ogbonnia (2019) Existence of Chaotic Phenomena in a Single-Well Duffing Oscillator under Parametric Excitations. World Journal of Mechanics, 09 (04). pp. 67-80. ISSN 2160-049X

Ghanbari, Jaafar and Dehparvar, Amirhossein and Zakeri, Amirhossein (2022) Design and Analysis of Prosthetic Heart Valves and Assessing the Effects of Leaflet Design on the Mechanical Attributes of the Valves. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Gomez, Frederick Ray I. and Rodriguez, Rennier S. (2020) Integration of EMI Shielding Design for Substrate Package Isolation. Journal of Engineering Research and Reports, 17 (2). pp. 18-22. ISSN 2582-2926

Goswami, Debadutt and Jiang, Ping (2010) An Experience Based Learning Controller. Journal of Intelligent Learning Systems and Applications, 02 (02). pp. 80-85. ISSN 2150-8402

Hall, J.L. and Bevas, C.J. and Hinder, S.J. and Kynaston, E.L. and Lindsay, C.I. and Gruber, P. and Keddie, J.L. (2022) Environmental Effects on the Coefficient of Friction and Tack Adhesion of Formulated Waterborne Coatings. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Hao, Yang (2024) Overview of the Current Research Status of Concrete-Filled Steel Tube. Journal of Engineering Research and Reports, 26 (4). pp. 85-91. ISSN 2582-2926

Ilouno, J. and J. Audu, I. (2018) Optical Time Domain Reflectometer Assessment of Attenuation in Fiber Optics Communication System. Journal of Engineering Research and Reports, 1 (4). pp. 1-6. ISSN 2582-2926

Jenkins, Peter and Elmnifi, Monaem and Younis, Abdalfadel and Emhamed, Alzaroog (2019) Hybrid Power Generation by Using Solar and Wind Energy: Case Study. World Journal of Mechanics, 09 (04). pp. 81-93. ISSN 2160-049X

Ji, Huawei and Zhou, Chuanping and Fan, Jiawei and Dai, Huajie and Jiang, Wei and Gong, Youping and Xu, Chuzhen and Wang, Ban and Zhou, Weihua (2022) Angular Displacement Control for Timoshenko Beam by Optimized Traveling Wave Method. Aerospace, 9 (5). p. 259. ISSN 2226-4310

Joshi, Narahari V. (2013) Mechanism for Electrostatic Repulsion or Attraction. World Journal of Mechanics, 03 (07). pp. 307-309. ISSN 2160-049X

K. Gaboutloeloe, Gilbert and Molokwe, Gugu and Kayombo, Benedict (2018) Impact of Partially Treated Wastewater on Downstream Water Quality of Notwane River in Botswana. Journal of Engineering Research and Reports, 1 (4). pp. 1-9. ISSN 2582-2926

Kadry, Seifedine and Hami, Abdelkhalak El (2015) A Novel Technique for Evaluating Failure Probability of Random Structure. World Journal of Mechanics, 05 (08). pp. 139-150. ISSN 2160-049X

Kubota, Yoshihiro and Mochizuki, Osamu (2013) Role on Moment of Inertia and Vortex Dynamics for a Thin Rotating Plate. World Journal of Mechanics, 03 (06). pp. 270-276. ISSN 2160-049X

Kubota, Yoshihiro and Mochizuki, Osamu (2015) Splash Formation Due to a Frog Diving into Water. World Journal of Mechanics, 05 (07). pp. 129-137. ISSN 2160-049X

Makhkamov, Anvar (2021) Determination of the Friction Coefficient in the Flat Strip Drawing Test. Engineering, 13 (11). pp. 595-604. ISSN 1947-3931

Mary Nweke, Mmasinachi and O. Chukwuma, Franklin and O. Evbuomwan, Benson and Oji, Akuma (2021) Kinetics Studies on the Coagulation of Abattoir Wastewater Using Groundnut Shell Extract as a Natural Coagulant. Journal of Engineering Research and Reports, 21 (3). pp. 23-33. ISSN 2582-2926

Matmurodov, Farkhod and Sobirov, Bozorboy and Tulanov, Isomiddin and Mirzaabdullayev, Jakhongir and Khakimov, Jamshid and Daminov, Oybek (2019) Mathematical Modeling of the Transfer of Energy Forces from the Engine through Hydro Transmission and Hydro Differential to Executive Bodies. World Journal of Mechanics, 09 (05). pp. 105-112. ISSN 2160-049X

Mishra, Amit and Zaheeruddin, Zaheeruddin (2010) Design of Hybrid Fuzzy Neural Network for Function Approximation. Journal of Intelligent Learning Systems and Applications, 02 (02). pp. 97-109. ISSN 2150-8402

Nwajuonye, Raymond Onyeka and Okonkwo, Innocent Ifeanyi and Iloh, Johnpaul I. (2021) Distribution Network Reliability and Efficiency Enhancement Using Distributed Generation. Journal of Engineering Research and Reports, 21 (3). pp. 55-71. ISSN 2582-2926

Nweke, Chinenyenwa Nkeiruka and Nwabanne, Joseph Tagbo (2020) Kinetics of Anaerobic Digestion of Unripe Plantain Peels. Journal of Engineering Research and Reports, 17 (2). pp. 7-17. ISSN 2582-2926

O. Akinnuli, B. and K. Apalowo, R. (2018) Regression Analysis Based Effective Manpower Planning Methodology: A Case Study. Journal of Engineering Research and Reports, 1 (4). pp. 1-12. ISSN 2582-2926

O. Ilugbo, S. and D. Adebiyi, A. and O. Olaogun, S. and Egunjobi, T. (2018) Application of Electrical Resistivity Method in Site Characterization along Ado – Afao Road, Southwestern Nigeria. Journal of Engineering Research and Reports, 1 (4). pp. 1-16. ISSN 2582-2926

Obike, Peter G. and Obot, Okure U. and Ekong, Victor E. (2024) Feature Engineering for Agile Requirement Management Using Semantic Analysis. Journal of Engineering Research and Reports, 26 (9). pp. 287-304. ISSN 2582-2926

Okello, J. A. and Mutuku, W. N. and Oyem, A. O. (2020) Analysis of Ethylene Glycol (EG)-based ((Cu-Al2O3), (Cu-TiO2), (TiO2-Al2O3)) Hybrid Nanofluids for Optimal Car Radiator Coolant. Journal of Engineering Research and Reports, 17 (2). pp. 34-50. ISSN 2582-2926

Okon, Edet Ita and Appah, Dulu and A. Ajienka, Joseph (2021) Review of Python Applications in Solving Oil and Gas Problems. Journal of Engineering Research and Reports, 21 (3). pp. 13-22. ISSN 2582-2926

Olszewski, Stanisław (2019) Circular Scale of Time as a Guide for the Schrödinger Perturbation Process of a Quantum-Mechanical System. World Journal of Mechanics, 09 (05). pp. 113-145. ISSN 2160-049X

Rao, Jakkula Anand and Vasumathi, Gandamalla and Mounica, Jakkula (2015) Joule Heating and Thermal Radiation Effects on MHD Boundary Layer Flow of a Nanofluid over an Exponentially Stretching Sheet in a Porous Medium. World Journal of Mechanics, 05 (09). pp. 151-164. ISSN 2160-049X

Rodriguez, Rennier S. and Gomez, Frederick Ray I. and Bacquian, Bryan Christian S. (2020) Die Attach Process Defect Mitigation through Design Improvement on Anvil Block Tooling. Journal of Engineering Research and Reports, 17 (2). pp. 1-6. ISSN 2582-2926

Rutto, Celestine Chepkemoi and Chepkwony, Isaac and Oke, Abayomi Samuel (2024) Numerical Comparison of Cu and Al\(_2\) O\(_3\) Nanoparticles in an MHD Water-based Nanofluid. Journal of Engineering Research and Reports, 26 (6). pp. 139-146. ISSN 2582-2926

Sarafian, Haiduke (2013) Linear, Cubic and Quintic Coordinate-Dependent Forces and Kinematic Characteristics of a Spring-Mass System. World Journal of Mechanics, 03 (06). pp. 265-269. ISSN 2160-049X

Sharada, Kankanala and Shankar, Bandari (2015) MHD Mixed Convection Flow of a Casson Fluid over an Exponentially Stretching Surface with the Effects of Soret, Dufour, Thermal Radiation and Chemical Reaction. World Journal of Mechanics, 05 (09). pp. 165-177. ISSN 2160-049X

Silva, Alice Rosa da and Silveira-Neto, Aristeu da and Lima, Antônio Marcos Gonçalves de (2015) Rotational Oscillation Effect on Flow Characteristics of a Circular Cylinder at Low Reynolds Number. World Journal of Mechanics, 05 (10). pp. 195-209. ISSN 2160-049X

Sirima, Madjoyogo Herve and Naon, Betaboale and Compaore, Issa (2023) Modeling of an Automatic Optimization System of Cyanide Concentration in Carbon in Leach for Optimal Ore Processing in a Mining Company. Energy and Power Engineering, 15 (11). pp. 443-456. ISSN 1949-243X

Stefanović, Slobodan and Ahmadjonovich, Korabayev Sherzod and Erkinzonqizi, Shoxobiddinova Dilafruz (2021) Determination of Correction Values of Operating Reliability of Assembly Components of the Assembly—Front Spinner Spinning Box (R1 Rieter) on the Basis of Operating Data. Engineering, 13 (11). pp. 565-573. ISSN 1947-3931

Sujatha, K. Naga and Vaisakh, K. (2010) Implementation of Adaptive Neuro Fuzzy Inference System in Speed Control of Induction Motor Drives. Journal of Intelligent Learning Systems and Applications, 02 (02). pp. 110-118. ISSN 2150-8402

Sun, Jing and Tang, Qi (2021) Review of Artificial Neural Network and Its Application Research in Distillation. Journal of Engineering Research and Reports, 21 (3). pp. 44-54. ISSN 2582-2926

Tahri, Nizar (2021) Anisotropic Metamaterials Filled Rectangular Metallic Waveguides Propagation Study and Analysis. Journal of Engineering Research and Reports, 21 (3). pp. 34-43. ISSN 2582-2926

Thomas, Akyen and Baah, Christopher Kwesi and Odonkoh, Jonathan and Offei, Samuel Wilberforce (2023) Investigation of Recycled Plastic Waste into Bricks for the Construction of Housing Projects in Ghana. Journal of Engineering Research and Reports, 25 (8). pp. 107-114. ISSN 2582-2926

Thuraka, Bharadwaj and Pasupuleti, Vikram and Malisetty, Saiteja and Ogirri, Kenneth O. (2024) Leveraging Artificial Intelligence and Strategic Management for Success in Inter/National Projects in US and Beyond. Journal of Engineering Research and Reports, 26 (8). pp. 49-59. ISSN 2582-2926

Udeh, N. U. and Ugwoha, E. (2023) Assessment of Noise Pollution Levels at Major Motor Parks in Port Harcourt Metropolis, Rivers State, Nigeria. Journal of Engineering Research and Reports, 25 (1). pp. 1-10. ISSN 2582-2926

Velkavrh, Igor and Nachbauer, Werner and Mathia, Thomas G. (2022) Editorial: Tribology in Snow and Ice Environments. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Xia, Pu and Lai, Yun and Liu, Xiaozhou (2022) Adjustable Magnetic-Control Design of a Metasurface for Sound Insulation. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Yu, Peng and Hu, Zhiyuan and Xu, Guohua and Shi, Yongjie (2022) Numerical Simulation of Tiltrotor Flow Field during Shipboard Take-Off and Landing Based on CFD-CSD Coupling. Aerospace, 9 (5). p. 261. ISSN 2226-4310

Zaragoza, Julio H. and Morales, Eduardo F. (2010) Relational Reinforcement Learning with Continuous Actions by Combining Behavioural Cloning and Locally Weighted Regression. Journal of Intelligent Learning Systems and Applications, 02 (02). pp. 69-79. ISSN 2150-8402

Zhang, Haitao and Li, Zhi and Wang, Weilin and Zhang, Yasheng and Wang, Hao (2022) Geostationary Orbital Debris Collision Hazard after a Collision. Aerospace, 9 (5). p. 258. ISSN 2226-4310

Zhou, Xingyu and Qin, Tong and Meng, Linzhi (2022) Maneuvering Spacecraft Orbit Determination Using Polynomial Representation. Aerospace, 9 (5). p. 257. ISSN 2226-4310

Zumofen, Livia and Kopanska, Katarzyna S. and Bono, Epifania and Kirchheim, Andreas and De Haller, Emmanuel B. and Graf-Hausner, Ursula (2022) Properties of Additive-Manufactured Open Porous Titanium Structures for Patient-Specific Load-Bearing Implants. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Book Section

Abyzov, Vadym (2021) Definition and History of Architecture-&-Building Systems. In: Advanced Aspects of Engineering Research Vol. 5. B P International, pp. 118-133. ISBN 978-93-90888-40-5

Ammanagi, Nandini M. and Yadahalli, Ravi M. (2021) Slot Loaded Capacitive Fed Suspended RMSA with Meandered Ground Plane: A Recent Study. In: New Approaches in Engineering Research Vol. 14. B P International, pp. 50-58. ISBN 978-93-91882-97-6

Andonov, Sasho (2021) A Study on TCal (Touchless Calibration): Contribution to Metrology for Industry 4.0. In: New Approaches in Engineering Research Vol. 14. B P International, pp. 22-49. ISBN 978-93-91882-97-6

Babu, N. Bhanodaya Kiran (2021) Multi Objective Characteristics Optimization by Using Taguchi Coupled Grey Relational Analysis While Machining AA7075 Aluminium Alloys with Wire Electrical Discharge Machine. In: Advanced Aspects of Engineering Research Vol. 5. B P International, pp. 149-155. ISBN 978-93-90888-40-5

Babu, U. Vimal and Ramakrishana, M. and Nagamani, M. (2020) Performance of Indiesel Fuel and the Blend of Aviation Turbine Fuel in the Diesel Engine: Current Research. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 1-18. ISBN 978-93-90149-36-0

Brahmi, Abdennabi and Byar, Mohcine and Abounada, Abdelouahed and Chbirik, Ghizlane (2024) Design and Optimal Choice of a Photovoltaic Pumping System for Irrigation Purposes. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 1-14. ISBN 978-81-971164-7-6

Chavan, Madhuri and Maya, G. (2021) Recent Study on Speed Control for DC Encoder Motor and Path Optimization in an Automated Guided Vehicle. In: New Approaches in Engineering Research Vol. 2. B P International, pp. 37-45. ISBN 978-93-91312-83-1

Estela, Chávez-Sandoval Blanca and Miguel Angel, A. Ibáñez-Hernández and Francisco, García-Franco and Jacome, Galindo-Pérez Ezel and Paulina, Abrica González and Anatolio, Martínez-Jiménez and José Abraham, Balderas López (2020) Critical Research on Biological Synthesis and Characterization of Gold Nanoparticles (AuNPs), Using Plant Extracts. In: Recent Developments in Engineering Research Vol. 5. B P International, pp. 29-35. ISBN 978-81-947979-6-8

Fardi, Hamid (2020) Simulation and Design of Vertical Power MOSFETs utilizing Silvaco’s ATLASTM. In: Recent Developments in Engineering Research Vol. 5. B P International, pp. 1-14. ISBN 978-81-947979-6-8

Gören, Sami (2020) Predicting the Behaviour of the Sand Beam Reinforced by Geosynthetics. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 12-25. ISBN 978-93-89816-51-8

Hamiche, Larbi and Saad, Salah and Merabet, Leila and Zaamouche, Fares (2020) Harmonic Current Identification by Adaline Neural Network and Real-Imaginary Instantaneous Powers Algorithm. In: Recent Developments in Engineering Research Vol. 5. B P International, pp. 68-80. ISBN 978-81-947979-6-8

Hassan, M. K. and Alsabari, Ali Mohsen and C. S., Azura and Zafira, Ribhan (2024) Understanding Supercapacitor Performance: Voltage Dynamics and Internal Parameter Calculations with Validating Experiments. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 15-35. ISBN 978-81-971164-7-6

Jeyaprabha, T. J. and Sumathi, G. and Ahila, S. and Deepika, S. and Varshini, P. Jaya (2021) Snort’s Role in IoT Deployment. In: New Approaches in Engineering Research Vol. 1. B P International, pp. 138-148. ISBN 978-93-91215-70-5

Kacprzak, Dominik and Solowczuk, Alicja (2021) Effect of the Coincidence of Interdisciplinary Actions on the Expected Speed Reduction. In: New Approaches in Engineering Research Vol. 4. B P International, pp. 13-23. ISBN 978-93-91312-91-6

Karthikeyan, V. and Jamuna, V. and Christopher, I. William (2021) Phase Disposition PWM Based Multi Level Inverter with Reduced Number of Switches. In: Advanced Aspects of Engineering Research Vol. 7. B P International, pp. 1-15. ISBN 978-93-90888-71-9

Kosanam, Koushik and Nataraj, J. R. (2021) Weldability Studies of Novel Chromium Free Electrodes with Austenitic Grade Stainless Steels. In: New Approaches in Engineering Research Vol. 2. B P International, pp. 46-68. ISBN 978-93-91312-83-1

Kovziridze, Z. D. and Nizharadze, N. S. and Tabatadze, G. and Mshvildadze, M. and Nikoleishvili, E. and Mestvirishvili, Z. (2020) Research on Composite Stable to Corrosive Media in SiC-AL2O3-Si2ON2 System. In: Recent Developments in Engineering Research Vol. 5. B P International, pp. 15-28. ISBN 978-81-947979-6-8

Kulkarni, Jayshri S. and Dhabre, Swapnita (2020) An Ultra-Thin, Inverted 'E' Monopole Antenna for Wireless Operations in the Laptop Computer. In: Emerging Trends in Engineering Research and Technology Vol. 1. B P International, pp. 1-11. ISBN 978-93-89816-51-8

Kumar, Rajendra (2020) Plasma Polymerized Nanostructured Polyaniline as NO2 Gas Sensor. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 19-26. ISBN 978-93-90149-36-0

Leslie, Rahul and R., Abhilash and B., Saraswathy (2024) Pushover Analysis: A New Procedure to Include Torsional Effects in Buildings. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 36-52. ISBN 978-81-971164-7-6

Mahato, Jaydev Kumar and Gupta, S. K. (2021) Distribution of Natural Organic Matter (NOM) in Full-scale Drinking Water Utilities of India in Eastern Region - Challenges and Issues. In: Advanced Aspects of Engineering Research Vol. 5. B P International, pp. 134-140. ISBN 978-93-90888-40-5

Min, Ho Soon (2019) Dye Sensitized Solar Cells: Advances in Research and Development. In: New Advances in Materials Science and Engineering Vol. 1. B P International, pp. 109-124. ISBN 978-93-89246-26-1

Moayyedian, Mehdi and Dinc, Ali and Alsarraf, Ali and Hamouda, Walid and Almutairi, Abdolmohsen and Bushehri, Abdulaziz and Deehani, Ahmad (2021) Design and Optimization of Control Arm in a Solar Car Using QFD. In: New Approaches in Engineering Research Vol. 14. B P International, pp. 59-66. ISBN 978-93-91882-97-6

Papadopoulos, Panagis G. and Koutitas, Christopher G. and Lazaridis, Panos P. (2020) Critical Study on Incremental Static Analysis of 2D Flow, by Inter-Colliding Point-Particles, by Use of In-Compressible Rhombic Element. In: Recent Developments in Engineering Research Vol. 5. B P International, pp. 52-67. ISBN 978-81-947979-6-8

Pradhan, Raghuram and Reddy, Yarram Srinivasa and Shariff, Md. Jabihulla (2024) Characterization and Evaluation of Roselle and Kevlar Hybrid Composites Reinforced with Natural Fibers. In: Theory and Applications of Engineering Research Vol. 7. B P International, pp. 53-63. ISBN 978-81-971164-7-6

Rafique, Muhammad Musaddique Ali (2020) Failure Analysis of OmegA Stage 1, Static Test – May 30, 2019 Northrop Grumman, Promontory, Utah. In: Recent Developments in Engineering Research Vol. 6. B P International, pp. 152-154. ISBN 978-93-90431-78-6

Ramesh, M. V. and Kumar, G. Vijay (2021) Solar Powered Autonomous Vehicle for Seed Sowing. In: New Approaches in Engineering Research Vol. 4. B P International, pp. 1-12. ISBN 978-93-91312-91-6

Ruhiat, Yayat (2021) Pollutant Absorber Design by Using Condensation System to Minimize Air Pollutant Emissions from Industrial Estates. In: New Approaches in Engineering Research Vol. 2. B P International, pp. 80-89. ISBN 978-93-91312-83-1

S, Gomathy and George, Tony and P, Anitha and Subiramoniyan, S. and Paul, Jeno (2021) Phase-Locked Loop Controller for Three-Phase Unified Power Quality Conditioner for Non-linear and Voltage Sensitive Loads. In: New Approaches in Engineering Research Vol. 14. B P International, pp. 1-11. ISBN 978-93-91882-97-6

Sagar, G. V. R. and Sathyanarayana, M. Siva (2021) Evolutionary Ann Design Using Improved Selection Method. In: New Approaches in Engineering Research Vol. 14. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 12-21. ISBN 978-93-91882-97-6

Sharma, Binu and Rahman, S. K. (2020) Spatial Variability of Subsoil Properties of Guwahati City Using GIS Based Maps. In: Cutting-edge Research in Agricultural Sciences Vol. 3. B P International, pp. 36-51. ISBN 978-81-947979-6-8

Solowczuk, Alicja (2021) Effect of Bulb-outs at Intersections on Speed Reduction and Visibility Conditions in Tempo–30 Zone. In: New Approaches in Engineering Research Vol. 4. B P International, pp. 24-34. ISBN 978-93-91312-91-6

Sreedevi, B. and Rayavel, P. (2021) Study on Playing Games in Computers without Physical Interaction Using Electroencephalography for Differently Abled. In: Advanced Aspects of Engineering Research Vol. 5. B P International, pp. 141-148. ISBN 978-93-90888-40-5

Strack, K. and Davydycheva, S. (2021) Using Electromagnetics to Map Lateral Fluid Variations in Carbonates in SE Asia. In: New Approaches in Engineering Research Vol. 2. B P International, pp. 69-79. ISBN 978-93-91312-83-1

Titov, A. V. and Kazmierczak, G. J. (2020) Recent Study on Periodic Binary Signals with Zero Cross Correlation Based on Walsh Sequences. In: Recent Developments in Engineering Research Vol. 6. B P International, pp. 155-166. ISBN 978-93-90431-78-6

Togaev, Anvar A. and Shermukhamedov, Abdulaziz A. (2021) Study of the Stress-strain State of Frame Structures of Tractor Trailers. In: New Approaches in Engineering Research Vol. 1. B P International, pp. 149-162. ISBN 978-93-91215-70-5

Tzourmakliotou, Dimitra (2021) Study on Sustainable Design in Space Structures. In: New Approaches in Engineering Research Vol. 2. B P International, pp. 28-36. ISBN 978-93-91312-83-1